BUILDMATE Wawfow Wire Cup Brush Set 1/4" Shank 1" | 3" INCH [SOLD PER PIECE] Crimped Brushes For Angle Grinder Surface Finishing Tools WCE5401 | WCE3401 • WHT

BUILDMATE Wawfow Wire Cup Brush Set 1/4" Shank 1" | 3" INCH [SOLD PER PIECE] Crimped Brushes For Angle Grinder Surface Finishing Tools WCE5401 | WCE3401 • WHT

AVAILABLE IN:
►1" INCH WCE5401
►3" INCH WCE3401

SPECIFICATIONS:
►Model: WCE5401
►Diameter: 25mm 1" Inch
►Shank Diameter: 1/4" Inch
►Wire Diameter: 0.3mm
►Wire Length: 25mm
►No-load Speed: 4500r/min
►Apply on planning deburring edge honing descaling paint stripping weld seams
►Suitable for Steel Cast steel Soft wood Hard wood

SPECIFICATIONS:
►Model: WCE3401
►Diameter: 3" Inch / 75mm
►Shank Diameter: 1/4" Inch
►Wire Diameter: 0.3mm
►Wire Length: 20mm
►No-load Speed: 4500r/min
►Apply on planning deburring edge honing descaling paint stripping weld seams
►Suitable for Steel Cast steel Soft wood Hard wood

FEATURES:
►Wire cup brush is a surface finishing tool that features knot-crimped carbon steel wires.
►The abrasive brushing cup is made from oil hardened and tempered steel wires that ensure a fast and effective surface brushing.
►Use the wire brush for deburring, brushing, and cleaning large size steel surfaces. The surface finish brush has premium-grade wires attached to a small-sized cup and is rated for a high rotational speed.
►Easily mountable wire brush with threaded arbor ensures smooth brushing action with flare control for enhanced brush life.
►Safe and stable: the inner and outer fixed plates of the angle grinder wire cup wheel brush are made of thickened steel, which can effectively avoid wire flying and breakage during heavy work; The weight ratio is passed precise calculations, so as to provide good balance and stability
►Easy To Use: The design of this wire cup allows direct gentle pressure to ensure a full contact between the wires and the surface so as to get the best performance.